Inteldevconference

Installing a heavy mirror on the wall is not as exact as hanging a miniature painting on the wall, and it may seem to be more complicated than it is when you try hanging by yourself. Make sure the mirror you hang doesn’t create any trouble. But before hanging a heavy mirror, you first need to decide what type of wall you want to turn your Mantle Mirror. Since each division needs a different anchor, it is not easy to make your choices.

Do consider these steps to hang a heavy mirror and keep it centered on the wall:

Preparation Steps

Step 1: Firstly, discover all the types of walls you have in your home and then decide which division you will hang your heavy mirror. You can have drywall or a plaster wall, and push it into the wall and find out if it is drywall or not.

Step 2: The hanging mirror must have a stiff frame; a new mirror is safe to install when it already has hardware attached. But when we talk about an old mirror that does not have hardware attached, you can use the frame with angle brackets to suit your requirements.

Step 3: Select the correct spot to hang your heavy mirror on the wall. It will be easy to locate the mirror above the stud, but it is unnecessary to do it with a suitable anchor. Then mark the center of the stud and remember not to attach it near the light bulb.

Steps for hanging the mirror

Step 1: Hold the mirror in a particular place and keep it close to eye level. Now take close to the center of the top edge, put a mark on the wall with a pencil.

Step 2: On the backside of the mirror, you will see the D-rings on the hook. You can hang the wire from the pins on the wall.

Step 3: To get the suitable space between the hooks, stick to a piece of tape and mark the distance between D-rings.

Step 4: In step 1, you have to mark a line. Measure down from the mark and move the distance to the wall.

Step 5: Now mark the hook putting holes by centering your level on the wall.

Step 6: Now is the time to hang the mirror gently; use hooks already installed in the wall and gently push the mirror into them.

Tips for linking a mirror on the wall

1. Horizontally centering the mirror

• Please measure the width of the wall either from the end and then divide it into two.

• Utilize the tape to measure up from the floor to a few inches of standard fixing height. Buy the latest mantle mirror collection at burke decor. Click here to know more.

2. Vertically Centering the Mirror

• Measure the width of the wall with the tape and divide the number by two; this way, you mark the center horizontal point of the wall.

• Measure the height of the wall and mark the halfway on the wall with a dark mark.

• Now, measure the size of the frame and divide this by two again on the back of the frame.

So, these are all the essential points to hang your mirror on your wall and make your wall look incredibly attractive and elegant.

Share this post: on Twitter on Facebook on Google+